CLEANING CEMENT TILES: THE ULTIMATE GUIDE

Why is cleaning cement tiles so important?

Cement tiles are made from natural materials and have a porous surface. This condition makes them susceptible to stains and dirt. Without proper care, cement tiles can lose their color and shine. But don't worry, with the right methods and products, you can keep your cement tiles in top condition for a long time.

‍

These cleaning methods are suitable for cement tiles

There are various methods for cleaning cement tiles. Here are some of the most effective ones:

1. Regular sweeping and vacuuming: Remove dust and dirt from your cement tiles regularly to prevent particles from settling in the pores.

2. Damp wipe: Use a damp, not wet, cloth or mop to clean the tiles. Make sure that the water does not penetrate the tiles.

3. Neutral cleaning agents: Use mild, pH-neutral cleaning agents. Aggressive chemicals can damage the surface of the cement tiles.

4. Special cleaner for cement tiles: There are special cleaners that are specifically designed for cement tiles. These cleaners are gentle on the surface and effectively remove dirt and stains.

‍

Step-by-step instructions for cleaning cement tiles

To clean your cement tiles thoroughly and gently, you should follow these steps:

1. Preparation

Make sure you have all the necessary materials on hand:

• Soft broom or vacuum
• soft mop or microfiber towel
• bucket of lukewarm water
• pH-neutral cleaning agent

2. Remove dust and dirt

Sweep or vacuum the cement tiles thoroughly to remove loose dirt and dust. This step is important to prevent scratches on the surface.

3. Use detergent

Fill a bucket with lukewarm water and add the pH-neutral detergent. Follow the manufacturer's dosage instructions. Dip the mop or microfiber towel into the solution and wring it out well.

4. Wipe tiles

Wipe the tiles thoroughly with a damp mop or cloth. Work in small sections and rinse the mop regularly to prevent dirt from getting back on the tiles.

5. Let it dry

Allow the tiles to dry completely before stepping on them again. To speed up the drying process, you can use a fan.

‍

Tips for removing stains on cement tiles

Stains can occur despite all caution. Here are a few tips on how to remove stubborn stains:

oil stains

Oil stains are particularly persistent as they can penetrate deep into the pores of cement tiles. Use a special oil remover for cement tiles and let it work in accordance with the manufacturer's instructions. Then rinse the area thoroughly with water.

Water stains

Water stains can be caused by calcium deposits. These can be removed with a solution of water and vinegar. Apply the solution with a soft cloth and then rinse the area with clean water.

wine and food stains

These stains should be treated immediately to prevent them from penetrating the pores. Use a mild soap solution and a soft cloth to remove the stain. With stubborn stains, a special stain remover for cement tiles can help.

‍

Tips for impregnating

Sealing cement tiles can help extend their life and protect them from stains and dirt. And the best part: Sealing cement tiles is a relatively simple process:

1st cleaning: Clean the tiles thoroughly to make sure they are free from dirt and dust.

2. Drying: Let the tiles dry completely.

3. Apply sealer: Apply the sealer evenly to the tiles with a brush or roller.

4. Let it dry: Allow the sealer to dry completely before stepping on the tiles again.

‍

The waxing of cement tiles

The wax also protects, enhances the colors, gives a slight shine and forms a patina over time. The wax layer may only be applied to completely dried out soil. Depending on the weather, this can take up to 3 weeks.

We recommend the “Flour test”: Put a tablespoon of flour on a tile, wait a few minutes. If the bottom layer of flour can be blown away, the tile is dry enough.

We recommend Lithofin CottoWax finish. A product data sheet is available at www.lithofin.de. Fila has three products: matte (Filamatt), medium (Fila Satin) and strong (Fila Classic) shine. Apply with a sponge or cloth. After two hours, check and repeat once. The previously applied wax layer must be dry. Bean (polish) after 4-5 hours at the earliest and depending on the desired gloss level. Be sure to use a new, clean white pad.

conclusion

Proper care and cleaning of cement tiles is critical to maintaining their beauty and longevity. With the right methods and products, you can ensure that your cement tiles always shine and last for a long time. Do you still have questions about cleaning cement tiles? Don't hesitate to contact us!

‍

Frequently asked questions about cleaning cement tiles

Do I need special care for cement tiles?

Cement tiles are a natural, open-pored floor covering that is impregnated and waxed after installation. On this page, we give you from the chapter Basic cleaning comprehensive tips for caring for cement tiles. We are also happy to offer you the appropriate cleaning, impregnating and care products

Where can I buy suitable care products?

Mosaico Cement Tiles works with leading manufacturers of cement tile care products. We would be happy to make you an offer for the right products to care for your cement tiles. We deliver at reasonable prices and free of charge within Germany for orders over 150 euros. Please ask for delivery conditions for European countries. To do so, take with us contact on.

I already have a cement tile floor. How can I do a deep cleaning?

Mosaico Zementliesen works closely with leading manufacturers of cleaning and care products for cement tiles. Benefit from our experience. Write to us How many square meters of tile floor you would like to clean, we will send you detailed instructions and make you a non-binding offer for the cleaning, impregnating and care products you need.

‍